Resin coating for workshop in Manchester ACL Industrial Flooring were asked to provide a hard wearing clean surface that would highlight different working and trafficking areas. The floor finish also had to have a degree of slip resistance. Our Manchester based clients decided on an epoxy resin floor coating incorporating an aluminium oxide slip resistant texture. The floor was to be sectioned up in different colours to highlight the clients working and safety areas.

They chose a blue resin flooring for the working area, green resin flooring for the pedestrian walkways and a mid grey resin floor coating for the forklift aisle ways. ACL Industrial Flooring carried out preparation on this Manchester resin flooring project by dust controlled mechanical grinding the existing concrete floor slab. This was done to remove the contamination to provide a clean open surface for the resin flooring system to adhere to, providing a long lasting resin flooring solution for our Manchester client.

The surface was vacuumed off to remove dust and debris then the areas requiring demarcation were taped off so the associated colour could be installed in the correct locations. Two coats of high build epoxy resin floor coating were installed over two days in the colours chosen by the client. After the resin floor coating had cured the areas requiring lines were taped up and the floor stencils placed in position and checked with the client for placement.

Safety yellow thixo line marking resin floor coating was mixed and applied to the taped and stencils sections to define all areas and provide safety signs. This Manchester resin floor coating project was carried out and successfully completed in three days to full satisfaction of the client.

ACL Industrial Flooring carry out floor preparation, installation and repairs of resin floor coatings, screeds and other specialist floor systems not just in Manchester but throughout the UK, contact us for your free quotation.